Aluminum(1 x 5.25 Open Space to 4 x 2.5 SAS / SATA 6.0G HD)(Tra Hot-Swap Cage)(Backp​Lane) RW-425

PRODUCT TECHNICAL SPECIFICATIONS One 5.25" space converted to four 2.5" hotswap mobile rack module (additional RAID Controller Card needed) Support 4 x 2.5" SATA2/SATA3 (SAS6G) HDD/SSD, fit 7mm, 9.5mm, 12.5mm, 14.5mm, 15mm height of HDD Entire mechanism by heat conductive aluminum extrusion heatsink with glossy brushed finish on the surface The newest PLinkUSA / RackBuy creative RailWay hotswap tray design with smooth travel while sliding in and out Patented anti-vibration spring design, HDD can be mounted from two sides or bottom of hotswap HDD tray 4 HDD LED, each LED with 3 colors, blue for power, purple for access, red for malfunction (fast red flash as overheat alert and slow red flash as fan malfunction) Cooling system with two 40mm x 20mm exhaust fans at rear side of HDD cage Rear interface: 4 x SATA 7pin data transfer port, 1 x SATA 15pin psu input port, HDD access signal on/off switch Accessory Pack: key x 2pcs, M3 flat head nickel screw x 20pcs, M3 round head nickel screw x 8pcs Product dimension: 180(L) x 146(W) x 42(H)mm Package: N.W. 0.71 KGM, G.W. 0.76 KGM, CUFT 0.050 (196mm x 153mm x 47mm, single box packed) recommended model to install 1U Micro ATX server chassis IPC-1211M and other Case that support 5.25" open bay; S/H $10

• Aluminum 1 x 5.25" to 4 x 2.5" SAS / SATA Hot-Swap Cage Backplane
• 4 x 2.5" SATA2/SATA3(6G) and SAS-1/SAS-2(6G) HDD
• One 5.25" space converted to four 2.5" hotswap mobile rack module (additional RAID Controller Card needed)
• fit 7mm, 9.5mm, 12.5mm, 14.5mm, 15mm height of HDD
• dimension: 180(L) x 146(W) x 42(H)mm